6201 Bearings Specifications:

6201 Bearings Related Introduction:

Deep groove ball bearings are the most common type of rolling bearings. The basic deep groove ball bearing consists of an outer ring, an inner ring, a set of steel balls and a set of cages.
There are two types of deep groove ball bearings: single row and double row. The single row deep groove ball bearing type is coded 6, and the double row deep groove ball bearing is coded 4. It has a simple structure and is easy to use.

It is the most commonly produced and widely used type of bearing. Working Principle Deep groove ball bearings mainly bear radial load, but can also bear radial load and axial load at the same time. When it is only subjected to radial loads, the contact angle is zero. When deep groove ball bearings have large radial clearance, they have the performance of angular contact bearings and can withstand large axial loads.
The friction coefficient of deep groove ball bearings is very small, and the limit speed is also very high. Especially under high-speed operating conditions with large axial loads, deep groove ball bearings have more advantages than thrust ball bearings.

The bearing structure, deep groove ball bearings The structure is simple and it is easy to achieve higher manufacturing precision than other types, so it is easy to produce in series and in large quantities, the manufacturing cost is also low, and it is extremely commonly used. At the same time, when the housing hole and the shaft (or the outer ring to the inner ring) are tilted relative to each other (not exceeding 8~-16~ determined according to the clearance), it can still work normally. However, if the tilt exists, it must be reduced. Bearing service life.
Compared with other types of bearings of the same size, deep groove ball bearings have the smallest friction loss and higher limit speed.
When the speed is too high and thrust ball bearings are not suitable, such bearings can be used to bear pure axial loads. If the manufacturing precision is improved and solid cages made of bakelite, bronze, duralumin and other materials are used, the rotation speed can be increased.

NSAR 6201 deep groove ball bearings has advanced manufacturing equipment:Forging,carefully turning,heat treatment,grinding many times,cleaning,cast block workshop,painting for blocks,final pallet packing,loading into container. It is can be applied to multiple industries. As an 6201 bearings supplier and manufacture, we provide high-quality 6201 bearing products.
We provide logo customization, and also accept ODM and OEM,the NSAR 6201 bearings are all low noise,low vibration,low friction,high precision,high sealed,high turning speed and long life.