[wpdatatable id=96 table_view=regular]

Reemplazorodamientos de bolas de chumacera de hierro fundidode la UCP 218

If a bearing insert needs to be replaced, it is not always necessary to replace the housing, if the housing
is undamaged.Simply insert a new bearing into the old housing, after care fully inspecting the housing to assure that it is not damaged.

Replacement procedures for a bearing insert are listed below.
(1) Remove the complete bearing unit from the shaft and mounting base.
(2) Screw in the set screws so that the head of the set screw does not protrude outside the 0.D. the inner race. Otherwise the head of the set screw may damage the bearing seat inside the housing.
(3) Turn the bearing 90° with a hammer handle or a bar or pipe until the bearing is horizontal.
(4) Remove the bearing insert from the housing via the bearing groove in the housing.
Reverse the above procedure to put in a new bearing insert. Insure that the set screws are screwed in before proceeding with the replacement.

Venta al por mayor UCP 218 | Proveedor UCP 218

Bienvenido aFabricante UCP 218– NSAR, your trustedFábrica de rodamientos de bolas UCP 218 al por mayor¡Cojinete de bolas con chumacera UCP 218! Como fabricante líder de rodamientos de chumacera UCP 218 en la industria de los rodamientos, nos enorgullecemos de ofrecer UCP 218 de alta calidad, incluidos UCP 216 y UCP 217. NSAR ofrece una amplia gama de UCP 218 a los precios más competitivos, lo que le brindará con una gran experiencia de compra.